Calacatta Bronze PVC panel - Waterproof
Calacatta Bronze PVC panel - Waterproof
Local pickup available · Fast delivery
Elegant Calacatta Marble With Bronze Veining
The Calacatta Bronze PVC Marble Wall Panel gives you the refined look of natural Calacatta marble without the cost, weight or maintenance of stone. Its bright white background has soft gray movement, fine dark accents and warm bronze-copper veining that runs diagonally across the surface. The pattern is luxurious but still airy. It pairs beautifully with brass and bronze fixtures, wood tones, cream and beige palettes and blue accents.
Large-Format PVC Panel
Each sheet measures 48 × 96 inches (4 × 8 ft), is 3 mm thick, covers 32 sq. ft. and weighs 41 lbs. A 4 × 9.5 ft option is also available for taller walls and covers the full height in one piece, with no gaps to patch. Because the sheets are so large, the veining flows across the wall with fewer visible joints than tile or smaller wall coverings.
Designed for Residential and Commercial Interiors
Use this panel in bathrooms, on shower walls and bathtub surrounds, in vanity areas, kitchens and backsplashes. It also makes an elegant TV wall, accent wall or feature wall in living rooms, bedrooms and offices. In commercial spaces, it suits reception areas, hotels, restaurants, retail stores, showrooms, salons and lobbies.
Waterproof and Easy to Maintain
The waterproof PVC construction makes the panel a practical choice for bathrooms, kitchens and other areas exposed to water. The surface wipes clean with a damp cloth and, unlike natural stone, needs no sealing or polishing.
Installation and Wet-Area Considerations
Install the panel with an appropriate panel adhesive. You can add suitable trims at edges, corners, joints and transitions for a finished look. In bathrooms, showers and other wet areas, seal all seams, corners, edges and transitions properly. The wall or substrate behind the panels should also be waterproofed.
What sizes are available?
Our PVC marble panels come in two sizes: 4 x 8 ft (48 x 96 in), covering 32 sq. ft., and 4 x 9.5 ft (48 x 114 in), covering 38 sq. ft. Both are 3 mm thick.
Which size should I choose?
Choose 4 x 8 ft for walls up to 8 ft high. For 9-foot ceilings, the 4 x 9.5 ft panel covers the full height in one piece, with no horizontal seam.
How many panels do I need?
Use the “How much do you need?” calculator above: enter your wall width and height, and it will show the number of panels. We recommend adding one extra panel to allow for cuts around windows, outlets, and corners.
Are these panels suitable for bathrooms and showers?
Yes. The waterproof, moisture-resistant panels are suitable for bathrooms, shower walls, bathtub surrounds, and vanity walls. In wet areas, seams, corners, edges, and transitions must be properly sealed, and the wall or substrate behind the panels should have appropriate waterproofing.
Can I use them as a kitchen backsplash?
Yes. The waterproof, easy-to-clean surface works well as a backsplash. Keep the panels away from direct contact with stovetop flames or high-heat sources.
Where else can these panels be installed?
They are suitable for interior walls such as living rooms, TV walls, feature walls, bedrooms, offices, reception areas, hotels, restaurants, retail stores, showrooms, salons, and lobbies. They are not intended for outdoor use.
How are the panels installed?
Install them using an appropriate panel adhesive on a clean, dry, flat wall. Suitable trims should be used for edges, corners, joints, and transitions where required.
Can one person install these panels?
The panels are lightweight compared to stone, but because of their large size, we recommend having a second person help lift and align each sheet.
Are these panels suitable for renters?
The panels are installed with construction adhesive, which is a permanent installation and may damage drywall if removed. For a temporary solution, mount a plywood backing board to the wall studs and install the panels on the board, so the whole setup can be removed later.
Do you offer professional installation?
Yes. Our team installs panels in Charlotte and the surrounding areas. Request an installation quote on this page, and we’ll contact you with the next steps.
How do I maintain the panels?
Clean the surface with a soft cloth or sponge and a mild household cleaner. Avoid abrasive pads or harsh chemicals that may damage the finish.
9.5 FT PANELS
Built for 9-foot walls.
Standard 8 ft panels stop short and leave a gap that needs patching. Our 4 x 9.5 ft panels cover the full wall height in one piece.
In stock in Charlotte · Same price per sq. ft.
How to Install PVC Marble Panels
A simple step-by-step guide for a clean, professional finish.
PVC marble sheets bring the look of natural stone to interior walls without the weight, cost, or complicated installation of real marble. With the right tools, surface preparation, and adhesive, they can be installed efficiently and create a polished result.
Before you begin, make sure the wall or substrate is clean, dry, flat, and properly prepared. In bathrooms, showers, and other wet areas, the surface behind the panels should be waterproofed and all seams, edges, and transitions should be sealed correctly.
Why Choose PVC Marble Sheets?
Lightweight & Easy to Handle
Easier to transport, position, cut, and install than natural stone.
Waterproof & Moisture Resistant
Suitable for bathrooms, kitchens, backsplashes, and other moisture-prone interiors when installed correctly.
Large-Format Coverage
Each 4 × 8 ft panel covers approximately 32 sq. ft. for fewer joints and a more seamless marble look.
Easy to Maintain
Smooth PVC surfaces are easy to clean and do not require sealing or polishing.
Tools & Materials You’ll Need
Before starting the installation, prepare all necessary tools and materials.
Essential Tools
- Measuring tape
- Pencil
- Straight edge or ruler
- Level
- Utility knife or PVC panel cutter
- Panel adhesive suitable for PVC
- Caulking gun
- Rubber roller or flat scraper
- Clean cloth or sponge
- Protective gloves
Optional Tools
- Jigsaw for outlets, corners, or more complex cuts
- Drill and appropriate bits if additional mechanical fastening is required
- Painter’s tape for temporary positioning or marking
Important: Always confirm that the adhesive you use is compatible with both PVC and the wall surface.
Step-by-Step Installation
Follow these five simple steps for a clean, secure, and professional-looking result.
Step 1: Prepare the Surface
Make sure the wall is clean, dry, flat, and structurally sound before installation.
- Remove dust, grease, and loose paint
- Ensure the surface is completely dry
- Fill holes or irregularities if needed
- Waterproof the substrate in wet areas
Step-by-Step Installation
Follow these five simple steps for a clean, secure, and professional-looking result.
Step 2: Measure and Plan the Layout
Measure the height and width of the wall before cutting any panels.
- Plan the layout so the marble pattern flows naturally from panel to panel
- Minimize narrow cut pieces whenever possible
- Position cut edges in corners or less visible areas
- Mark straight reference lines with a level and pencil
- Dry-fit the panels before applying adhesive
Step 3: Cut the Panels
Measure carefully and mark the cutting lines before trimming the panel to size.
- Use a utility knife, PVC panel cutter, or fine-tooth cutting tool for straight cuts
- Measure and mark openings for outlets, switches, or pipes accurately
- Use a jigsaw for detailed cutouts when needed
- Test-fit each panel before applying adhesive
- Double-check all measurements before cutting
Step-by-Step Installation
Follow these five simple steps for a clean, secure, and professional-looking result.
Step 4: Apply Adhesive to the Back
Apply a PVC-compatible construction adhesive to the back of the panel according to the adhesive manufacturer’s instructions.
- Use a zigzag or vertical bead pattern to distribute the adhesive evenly.
- Make sure the perimeter and center of the panel have adequate coverage.
- Avoid excessive adhesive near the edges to prevent squeeze-out.
- Install the panel within the adhesive manufacturer’s recommended working time.
Step 5: Position the Panel on the Wall
Carefully place the panel on the wall, starting from your planned reference point.
- Press the panel firmly and evenly against the surface.
- Use a rubber roller or flat scraper to improve adhesive contact.
- Remove trapped air and ensure the panel sits flat.
- Check alignment regularly as you continue installing additional panels.
- Use suitable trims or sealant for exposed edges, corners, joints, and transitions.
- In wet areas, seal all seams and transitions properly.
Where Can PVC Marble Sheets Be Installed?
PVC marble sheets can be used in a wide variety of interior spaces, offering a lightweight, decorative wall solution for both residential and commercial applications.
Bathrooms & Vanity Areas
Create a marble-inspired look around vanities, bathtub surrounds, shower walls, and bathroom feature walls. When used in wet areas, the substrate should be properly waterproofed and all seams should be sealed correctly.
Kitchens & Backsplashes
Use them for decorative kitchen walls and backsplashes where a durable, easy-to-clean surface is desired.
Living Rooms & TV Walls
Transform an ordinary wall into a large-format marble feature wall or modern media wall with a sleek, architectural finish.
Bedrooms & Hallways
Add a polished decorative touch to accent walls, entryways, and other interior surfaces.
Commercial Spaces
PVC marble sheets can also be used in offices, reception areas, salons, retail stores, restaurants, hotels, and showrooms.
Common Installation Mistakes to Avoid
1
Skipping Surface Preparation
Dust, grease, moisture, loose paint, and uneven areas can prevent the adhesive from bonding properly. Always install panels on a clean, dry, solid, and reasonably flat surface.
2
Using the Wrong Adhesive
Not every construction adhesive is suitable for PVC. Use an adhesive specifically compatible with PVC panels and your wall substrate.
3
Cutting Before Planning the Layout
Cutting panels before planning the marble pattern and joint placement can lead to unnecessary waste and an inconsistent finished appearance. Dry-fit and plan first.
4
Ignoring Wet-Area Waterproofing
A waterproof panel does not replace the waterproofing system behind the wall. In bathrooms and shower areas, use an appropriate waterproof substrate and seal seams and transitions properly.
5
Applying Uneven Pressure
If the panel is not pressed evenly against the wall, air pockets or weak adhesive contact may remain. Use a roller or flat scraper for consistent pressure.
6
Forgetting About Edges and Corners
Plan in advance how visible edges, inside corners, outside corners, and transitions will be finished. Use compatible trims or sealant for a cleaner result.
Final Installation Tips
- Measure twice before cutting
- Check alignment as you work
- Dry-fit every panel
- Seal wet-area joints carefully
- Follow the adhesive manufacturer's instructions
- Use compatible trims for a finished appearance
For complex layouts, plumbing areas, or walls requiring significant preparation, professional installation may be the best option.
Need Installation? We Can Handle It.
From a single feature wall to a full-room installation, our team can help bring your project to life with a clean, professional finish.
Professional installation for:
- TV & feature walls
- Bathrooms & shower walls
- Kitchens & backsplashes
- Bedrooms & living spaces
- Commercial interiors
- Custom wall panel projects
Serving Charlotte and surrounding areas.
Request an Installation Quote
Tell us a little about your project and our team will contact you with the next steps.